Tumbled Slate

Be the first to rate

Tumbled Slate consists of slate pieces with softened edges. It is used as a decorative landscape stone in dry creek beds, along flower bed edges and around ponds and water features. Sizes range from 10 to 40 cm.

Product description

Slate pieces with softened edges

Tumbled Slate is for those who want pieces with soft lines instead of sharp-cornered crushed stone. The slate pieces are turned in a drum until their edges soften. It is used as a decorative landscape stone in dry creek beds, along flower bed edges and around ponds and water features. Slate is a layered metamorphic rock. The pieces range from 10 to 40 cm: small ones for infill and edging, large ones as accent points.

A dry creek bed with tumbled slate

A dry creek imitates a streambed with stone. Mark the curve of the bed on the ground, dig it out slightly and lay a weed barrier. Place the large pieces on the outer edges of the curves and the small pieces inside the bed. Fill the gaps with fine gravel to finish the look. If you draw the bed along the natural slope of the garden, rainwater will follow the same line. If you use it at the edge of a pond or water feature, keep in mind that the stone's tone darkens when wet.

For infill gravel, see Basalt Natural Stone or Dolomite Pebble Stone. For floor and wall cladding, see Slate Stone. For a quote, send us the area and the size you want through our contact page.

What is Tumbled Slate used for?

  • Soft edges

    Pieces with softened edges look more natural than sharp-cornered crushed stone.

  • Suits waterside areas

    Used where a natural look is wanted, such as dry creek beds and around ponds and water features.

  • Various sizes

    Sizes range from 10 to 40 cm. Small pieces go into infill and large ones mark accent points.

  • Flower bed edging

    Finishes the edge of flower beds and planting islands with a natural line.

How does Tumbled Slate work?

The slate pieces are rotated in a drum and their edges are softened. In landscaping the pieces are half-buried in soil or a gravel layer so they stay in place and look natural. Pieces laid loose form a border along flower beds.

  • Size 10-40 cm Piece size Size recorded in the product data sheet: 10-40 cm.
  • Soft edges Edges softened in a drum Product type recorded in the product data sheet: slate pieces with softened edges.
  • Half-buried Recommended placement Placement recorded in the product data sheet: half-buried in soil or a gravel layer, or laid loose.

How Tumbled Slate differs from standard products

TopicOrdinary productThis product
EdgesCrushed stone has sharp corners. The edges are softened in a drum.
AppearanceUniform gravel gives a flat surface. Pieces of different shapes give the look of a natural streambed.
PlacementStone resting on the surface shifts over time. The pieces are set half-buried.

Using and installing Tumbled Slate

  1. Draw the plan

    Mark the line of the dry creek bed or flower bed edge on the ground.

  2. Prepare the ground

    Dig out the line slightly and lay a weed barrier.

  3. Place the large pieces

    Set the large pieces half-buried on the outer edges of the curves and at accent points.

  4. Fill the gaps

    Arrange the small pieces inside the bed and spread fine gravel between them.

Care: Pick up leaves that fall between the stones. Re-bury any piece that shifts.

Where is Tumbled Slate used?

  • Dry creek bed
  • Flower bed edge
  • Pond surround
  • Water feature surround
  • Planting island
  • Garden decor

Product details

Technical Specifications

Stone Type
Slate
Product Type
Slate pieces with softened edges (tumbled slate)
Size
10-40 cm
Color
As a natural stone, the tone varies from batch to batch
Applications
Dry creek beds, flower bed edges, around ponds and water features, planting islands and landscape decor
Placement
Half-buried in soil or a gravel layer, or laid loose
Material Note
Each piece has a different shape

Frequently Asked Questions

What is tumbled slate?
It is slate in pieces that have been turned in a drum to soften the edges.
What sizes does it come in?
It comes in sizes from 10 to 40 cm. Small pieces are used for infill, large ones as accent points.
How much stone do I need for a dry creek bed?
Send us the length and width of the bed, and we will calculate the quantity together based on the density you want.
Can it be used for floor paving?
This product is a decorative landscape stone. For a surface people will walk on, see Slate Stone.
Will the stones shift?
Yes, pieces left loose on the surface can shift. Set them half-buried in soil or a gravel layer.

Reviews

There are no reviews for this product yet — be the first to write one.

Write a Review
Your rating:

Your review will be published after moderation.

Jidar Group

Get a Quote

Tell us briefly what you need and we will get back to you with a quote.

Your details are only used to respond to this request. Privacy Notice