Workshop Tent

Be the first to rate

A Workshop Tent is a tent we supply to businesses that want to move welding, painting and assembly work into an enclosed area outside the building. Ventilation, translucent tarpaulin for daylight and interior partition curtains are chosen for the work.

Product description

An enclosed area for welding, painting and maintenance work

A workshop tent is for businesses that want to move work such as welding, painting, maintenance, repair or assembly into an enclosed area outside the building. It is smaller than a factory-scale manufacturing tent. Think of one or two workbenches, a few machines or a vehicle in for maintenance. The frame is built from galvanized steel or aluminum profile, and the roof and sides are covered with PVC-coated polyester tarpaulin. We supply workshop tents. We provide the Warehouse Tent Installation service with our own crew.

Options for a Workshop Tent

  • Ventilation: Opening side panels, ridge ventilation or fans are chosen so welding and paint fumes do not build up inside.
  • Daylight: Translucent tarpaulin or clear panels provide more natural light at the workbench during the day.
  • Partition: A partition curtain separates the welding, painting and assembly sections, so welding sparks and dust do not reach the painting area.
  • Door: If vehicles will enter for maintenance, a sliding tarpaulin door or roller shutter is chosen.

Before installation

Tarpaulin is a textile product. Keep the welding bench away from it and put a spark curtain around the welding point. The frame is selected according to the snow and wind loads calculated for the project location. Article 5 of Turkish Zoning Law No. 3194 also classifies temporary and movable facilities as structures. Before installing the tent, check with your municipality or your organized industrial zone management.

For a quote, send us the work to be done, the dimensions of workbenches and machines, whether vehicles will enter and the address. For a production line, see the Manufacturing Tent page. Boat maintenance has its own Shipyard Tent page. Send your list through the contact page and we will quote.

What is Workshop Tent used for?

  • Fumes out

    Welding and paint fumes are removed with opening side panels, ridge ventilation or fans.

  • Daylight

    Translucent tarpaulin or clear panels can be chosen.

  • Divided into sections

    A partition curtain separates the welding, painting and assembly areas.

  • Installed by our own crew

    We provide the Warehouse Tent Installation service with our own crew.

How does Workshop Tent work?

The project starts with a list of the work to be done in the workshop. The layout of workbenches, machines and vehicles sets the tent size. Welding and painting work determine the ventilation and partition needs. The frame is selected for these dimensions and for the snow and wind loads at the site. The tarpaulin is then stretched over the frame.

  • Fan One of the ventilation options Listed in the product data sheet: opening side panel, ridge ventilation or fan.
  • Clear panel Daylight option Listed in the product data sheet: translucent tarpaulin or clear panel.
  • Divider curtain Divides the interior into sections Interior partition option listed in the product data sheet.

How Workshop Tent differs from standard products

TopicOrdinary productThis product
Welding and painting outdoorsWind and rain stop the work, and dust settles on the paint. The work is done in an area covered on the top and sides.
FumesFumes build up in an enclosed area with no ventilation. A ventilation option is part of the project from the start.
Mixed workIn a single open area, welding sparks reach the painting area. A partition curtain separates the sections.

Using and installing Workshop Tent

  1. List the work

    Write down the work to be done, such as welding, painting, assembly or vehicle maintenance, and the space needed for each.

  2. Choose ventilation

    If there will be welding and painting, ask for opening panels, ridge ventilation or fans.

  3. Separate the welding area

    Place the welding bench away from the tarpaulin and set up a spark curtain around it.

  4. Ask about the permit

    Even though the tent is temporary, it may count as a structure. Check with your municipality before installation.

Care: Check the tarpaulin at regular intervals for spark marks, tears or holes. Do not block the ventilation openings.

Where is Workshop Tent used?

  • Welding workshop
  • Painting area
  • Vehicle maintenance
  • Machine repair
  • Carpentry workshop
  • Assembly area

Product details

Technical Specifications

Frame
Galvanized steel or aluminum profile frame
Cover
PVC-coated polyester tarpaulin
Tarpaulin Weight
Common options are 650 g/m² and 900 g/m²; chosen according to the location
Ventilation
Opening side panel, ridge ventilation or fan for welding and paint fumes
Daylight
Translucent tarpaulin or clear panel option
Interior Partition
Partition curtain option separating the welding, painting and assembly sections
Door
Sliding tarpaulin door or roller shutter for vehicle access
Size
Based on the layout of workbenches, machines and vehicles; per project
Snow and Wind Load
Calculated for the project location
Installation
Warehouse Tent Installation service, with our own crew
Applications
Welding workshops, areas around paint booths, vehicle and machine maintenance, carpentry workshops

Frequently Asked Questions

Can welding be done in a workshop tent?
Yes, with care. Tarpaulin is a textile product. Keep the welding bench away from it, put a spark curtain around it and plan for ventilation.
What happens to the fumes when painting inside?
Opening side panels, ridge ventilation or fans carry the fumes out. If you will be painting, state your ventilation requirements at the quote stage.
Is it bright inside during the day?
If you choose translucent tarpaulin or clear panels, more natural light comes in during the day. Lighting for evening work is planned separately.
What is the difference between a workshop tent and a manufacturing tent?
A workshop tent is for smaller-scale work such as welding, painting, maintenance and repair. A manufacturing tent is planned for a production line, with the crane and machine foundations as the main concerns.
Who does the installation?
We provide the Warehouse Tent Installation service with our own crew.

Reviews

There are no reviews for this product yet — be the first to write one.

Write a Review
Your rating:

Your review will be published after moderation.

Jidar Group

Get a Quote

Tell us briefly what you need and we will get back to you with a quote.

Your details are only used to respond to this request. Privacy Notice