Shipyard Tent

Be the first to rate

The Shipyard Tent is a wide-span tent we supply for boat and ship building, maintenance and painting. It keeps the weather off the job. Length and height are planned around the boat's dimensions, and the end door around boat entry and exit.

Product description

Covered space for boat and ship work

A shipyard tent keeps rain, wind and sun off boat and ship building, maintenance and painting work in shipyards and boat workshops. The galvanized steel frame closes the top and sides of a boat on a slipway or concrete yard with PVC-coated polyester tarpaulin. We supply shipyard tents, and we provide the Warehouse Tent Installation service with our own team.

In a shipyard tent, the boat sets the size. Take the boat's length and add a working allowance at both ends. The height depends on the boat's height on the cradle and on its mast, if it has one. If a crane will be used inside, add the hook's working clearance.

Options for the Shipyard Tent

  • Fully opening end: The boat is brought into and out of the tent by fully opening the end curtain or door on the short side.
  • Length: Adding modules to the frame makes the tent longer. If a larger boat comes in later, the tent can grow with it.
  • Coastal conditions: A seaside yard is exposed to wind. The frame is chosen according to the snow and wind load calculated for the project's location.
  • Painting and sanding: An enclosed space limits the spread of paint and sanding dust to the surroundings. Specify your ventilation needs inside at the quote stage.

Quote and permission

For a quote, send the boat's length, beam, height on the cradle, your crane requirement and the ground of the yard. If a project-specific frame is needed, we offer our Steel Structure Fabrication service. In Türkiye, Article 5 of Zoning Law No. 3194 also counts temporary and mobile facilities as structures. Consult the relevant authority and the shipyard management before setting it up.

For a workshop-scale maintenance area, see the Workshop Tent page. To cover the boat itself, see the Yacht and Boat Cover page. Other models are in the Shipyard Tents category. Send these details through our contact page.

What is Shipyard Tent used for?

  • Work regardless of weather

    Work on the boat goes on in rain and wind, and painting does not have to wait for the weather.

  • Sized to the boat

    Length and height are set by the boat's length, its height on the cradle and the crane clearance.

  • Full-open end

    The boat is brought in and out by fully opening the end curtain or door.

  • Dust and paint contained

    An enclosed space limits the spread of sanding dust and paint overspray to the surroundings.

How does Shipyard Tent work?

The galvanized steel frame rises on both sides of a boat on a slipway or concrete yard and spans over it with a wide opening. The tarpaulin is stretched over the frame. The boat is brought in by fully opening the end on the short side. You extend the length by adding modules. Frame sections are calculated from the snow and wind load on the coast.

  • Boat length Dimension that sets the tent's length Recorded in the product data sheet: length according to the boat's length and the working allowance at both ends.
  • Full-open end Boat entry and exit Recorded in the product data sheet: fully opening end curtain or door.
  • 900 g/m² Common fabric weight option Common option recorded in the product data sheet, chosen to suit coastal conditions.

How Shipyard Tent differs from standard products

TopicOrdinary productThis product
PaintingIn an open yard, painting is postponed because of rain and wind. The boat is painted in an enclosed space.
Dust in the surroundingsOutdoors, sanding dust and paint overspray are carried by the wind. An enclosed space limits the spread of dust.
Boat sizeA fixed structure cannot take a larger boat. Length is extended by adding modules.

Using and installing Shipyard Tent

  1. Measure the boat

    Write down the boat's length, beam and height on the cradle. Add the mast height if it has one.

  2. Specify the crane

    If a crane will be used inside, give the hook height and working clearance.

  3. Face the end toward the water or road

    Place the fully opening end toward the direction the boat will come from.

  4. Discuss ventilation

    If painting and sanding will be done, specify your ventilation requirement at the quote stage.

Care: Wind changes often on the coast. Check the tarpaulin tension, end curtain connections and anchors frequently. Because of the salty air, rinse the frame with fresh water at regular intervals.

Where is Shipyard Tent used?

  • Boat building
  • Ship maintenance and repair
  • Painting and sanding
  • Yacht winter storage
  • Shipyard
  • Marina haul-out area

Product details

Technical Specifications

Support System
Galvanized steel construction
Length
According to the boat's length and the working allowance at both ends; extended by adding modules
Interior Height
Set by the boat's height on the cradle, its mast and the crane clearance
End Door
Fully opening end curtain or door for boat entry and exit
Cover
PVC-coated polyester tarpaulin
Tarpaulin Weight
Common option 900 g/m²; chosen according to coastal conditions
Ground Anchoring
Anchors on a concrete yard or quay surface
Snow and Wind Load
Calculated for the project's location
Project-Specific Frame
Project-specific metal structures and tent frames through Steel Structure Fabrication
Installation
Warehouse Tent Installation service, with our own team
Applications
Boat building, ship maintenance and repair, painting and sanding, yacht winter storage

Frequently Asked Questions

How is the length of a shipyard tent determined?
Take the boat's length and add a working allowance at both ends. For larger boats, add modules to the frame to extend it.
How does the boat get into the tent?
The end curtain or door on the short side opens fully, and the boat is brought in on a cradle or trailer.
Can painting be done inside the tent?
Yes. The enclosed space limits the spread of paint overspray to the surroundings, but ventilation is needed inside. Specify your ventilation requirement at the quote stage.
What is done about wind at the seaside?
The frame is chosen according to the snow and wind load calculated for the project's location. Always give the address of the coastal yard.
Who does the installation?
We provide the Warehouse Tent Installation service with our own team. If a project-specific frame is needed, we offer our Steel Structure Fabrication service.

Reviews

There are no reviews for this product yet — be the first to write one.

Write a Review
Your rating:

Your review will be published after moderation.

Jidar Group

Get a Quote

Tell us briefly what you need and we will get back to you with a quote.

Your details are only used to respond to this request. Privacy Notice