3D Panel Fence

Be the first to rate

The 3D Panel Fence is a welded wire panel with horizontal V-folds. It is used for home gardens and around residential complexes and facilities. The wire diameter is 4 mm and the mesh size is 50x150 mm; powder coating is applied over galvanized wire.

Product description

Welded wire panel with V-folds

The 3D Panel Fence is a welded wire panel with V-folds; the vertical and horizontal wires are joined at every point where they cross. It takes its name from the horizontal V-folds that run along the panel. These folds give the panel depth: seen from the side, it is not a flat grid but a surface with recesses and ridges. There are 2 to 4 V-folds, depending on panel height.

It is used for home gardens, around residential complexes and factories, in parks and in parking lots.

3D panel fence pages by size

For choosing the height, see the panel fence page. Pages by size: 75x75 cm Panel Fence, 120x250 cm Panel Fence, 150x250 cm Panel Fence and 200x250 cm Panel Fence.

If you are looking for a panel without folds and with double horizontal wires, compare it with the 2D Panel Fence System. For temporary jobs such as construction sites and events, see the Portable Mobile Fence page. We provide panel fence installation in all 81 provinces of Türkiye and install panels, posts and gates together. For a quote, reach us through our contact page.

What is 3D Panel Fence used for?

  • V-folded surface

    Horizontal folds running along the panel give it depth.

  • Height options

    Panel heights of 100 cm, 120 cm, 150 cm and 200 cm; other heights on a project basis.

  • Two stock colors

    In stock: RAL 7016 anthracite gray and RAL 6005 green.

  • Clamp connection

    The panel is clamped to the post, so it can be removed and refitted.

How does 3D Panel Fence work?

The vertical and horizontal wires are welded at every point where they cross. Horizontal V-folds are then formed along the panel. On site, the panel attaches to the post with clamps; the panels follow one another along the run.

  • 50x150 mm mesh Mesh opening Mesh size as listed in the product data sheet.
  • 250 cm panel Width of one panel Panel width as listed in the product data sheet; post spacing is set accordingly.
  • 4 mm Wire diameter Wire diameter as listed in the product data sheet.

How 3D Panel Fence differs from standard products

TopicOrdinary productThis product
SurfaceA flat wire grid panel looks flat from the side. Horizontal V-folds run along the panel.
ConnectionChain link fence is attached to the posts with tension wire. The panel is clamped to the post.

Using and installing 3D Panel Fence

  1. Measure the line

    Measure the line the fence will follow in meters. Note the corners, gate positions and sloped sections separately.

  2. Choose the height

    Choose the height for the fence's job: a low divider, a front yard, a side or rear boundary, or a facility perimeter.

  3. Work out the number of panels and posts

    On a straight run, the number of panels is the run length divided by the panel width, rounded up. You need one more post than panels; corner and gate posts are added separately.

  4. Specify the ground type

    On soil, posts are set in concrete. On a concrete base, flanged posts are fixed with anchors. State the ground type in your quote request.

Care: Clean the painted surface with water and a soft brush. Cover any paint scratched during installation with touch-up paint.

Where is 3D Panel Fence used?

  • Home garden
  • Residential complex perimeter
  • Factory perimeter
  • Park
  • Parking lot
  • Warehouse perimeter

Product details

Technical Specifications

Panel Height
100 cm, 120 cm, 150 cm and 200 cm; other heights on a project basis
Panel Width
250 cm
Panel Type
Welded wire panel with V-folds
Wire Diameter
4 mm
Mesh Size
50x150 mm
Number of V-Folds
2 to 4, depending on panel height
Coating
Powder coating over galvanized wire; coating thickness 60–110 microns
Galvanizing Method
The wire is hot-dip galvanized during production
Color Options
In stock: RAL 7016 anthracite gray and RAL 6005 green
Post
50x50x1.5 mm box section, oven-baked paint
Panel Connection
The panel attaches to the post with clamps
Ground Fixing
Posts set in concrete on soil; flanged posts and anchors on concrete
Applications
Home and villa gardens, residential complex perimeters, factory and warehouse perimeters, parks, parking lots

Frequently Asked Questions

What is the difference between a 3D panel fence and a 2D panel fence?

A 3D panel has horizontal V-folds and single wires. A 2D panel has no folds; each horizontal row has two wires with the vertical wire welded between them. The wires used in a 2D panel are thicker.

How many meters of fence does one panel cover?

The panel width is 250 cm. Divide the run length by the panel width and round up to get the number of panels. Post width changes the calculation very little.

What are the wire diameter and mesh size?

On the 3D panel, the wire diameter is 4 mm and the mesh size is 50x150 mm. The panel width is 250 cm; standard heights are 100 cm, 120 cm, 150 cm and 200 cm.

Can grass fence be fitted on a panel fence?

Yes. If grass fence is attached to the inside face of the panel, the area behind it is hidden. If you choose grass fence of the same height as the panel, it will not stick out at the top or leave a gap at the bottom.

Do you offer installation?

Yes. We provide panel fence installation in all 81 provinces of Türkiye; this includes installing panels, posts and gates.

Reviews

There are no reviews for this product yet — be the first to write one.

Write a Review
Your rating:

Your review will be published after moderation.

Call now WhatsApp